
Chapter 3 Starting Diagnosis
3-7
Connecting a Probe
For the safety of the console and probe, be sure to power o the console before connecting or
disconnecting a probe to/from the probe port on the console.
1. Disconnect the probe by lifting the probe lock/unlock switch.
2. Connect the probe to the probe port.
3. Mount the probe by depressing the probe lock/unlock switch.
NOTE: If the probe does not connect properly, try reconnecting it after removing any foreign
objects.
Selecting an Application
In the Applications screen, you can select the desired application from the list of applications.
1. Use the trackball and the Set button to select an application.
2. Press the Ok dial-button to conrm your selection. Click on the screenTo cancel, press the Cancel dial-
buttonclick.
Tips!
Changing applications via the Soft Menu
Press the Utility key. The current probe preset will be shown in Soft Menu [1]. Rotate the dial-button
of soft menu to select the desired application. To apply the change, press the dial-button.
Comentários a estes Manuais