
Operation Manual
4-30
2D/C Live Mode
2D Mode and Color Doppler Mode are displayed simultaneously.
In Color Doppler Mode, use 2D/C Live in the soft menu.
Changing Combined Mode Format
■
Changing Active Image
Press the Update button. The currently active image mode, such as ‘D Only’ or ‘2D Only’, is displayed
on the menu on the screen.
A Combined Mode uses 2 or more image modes simultaneously. The image mode currently in use
in a Combined Mode is referred to as the ‘Active Image Mode’. For example, if moving the trackball
moves the sample volume in 2D/C/PW Mode, then the current active image mode is PW Spectral
Doppler Mode.
As each active image mode has its own set of menu items and buttons, you should press the Update
button to change the active image mode.
Note that when in Freeze state, pressing the Update button does not change the active image
mode.
■
Changing Menu
Press the Change Menu button.
This only changes the soft menu without changing the active image mode. The buttons on the
control panel are used for the active image mode.
For example, if the 2D Mode soft menu is currently displayed in 2D/C/PW Mode, pressing the
Change Menu button brings up the Color Doppler Mode soft menu.
NOTE: For information on optimizing images, see Basic Modes.
Comentários a estes Manuais