Samsung SRP-275 Manual do Operador descarregar pdf (Página 99)

5-1075-106

ESC BEL n1 n2

[Name] Set external drive device 1 pulse width

[Format] ASCII ESC BEL n1 n2

Hex 1B 07 n1 n2

Decimal 27 7 n1 n2

[Range] 1 ≤ n1 ≤ 127

1 ≤ n2 ≤ 127

[Default] n1 = 20 (Energizing time: 200 msec)

n2 = 20 (Delay time: 200 msec)

[Description] Sets the energizing and delay times for drive of the external device

(such as cash drawers).

Energizing time = 10 x n1 (ms)

After printing, this is executed by BEL (External device 1 drive instruction) or

FS (External device 1 drive instruction (real time)).

This command is ignored when n1 and n2 are out of range.

- n1 = 0 or n2 = 0: This command is ignored.

- When n1 > 128: n1 = 128. When n2 > 128, n2 = 128.

CONTROL COMMANDS LIST

CHAPTER 5

ESC d n

[Name] Paper cut instruction

[Format] ASCII ESC d n

Hex 1B 4C n

Decimal 27 64 n

[Range] 0 ≤ n ≤ 3

48 ≤ n ≤ 51 ("0" ≤ n ≤ "3")

[Default] ------

[Description] This command executes the auto-cut according to the n specification,

after printing data in the line buffer. After auto-cutter is executed, the printer

considers that position to be the top of the page.

Auto cutter n Auto cutter

Partial cut at the current position.

This command is ignored on tear-bar models.

Partial cut at the current position.

This command is ignored on tear-bar models.

Paper is fed to cutting position, then a Partial cut is executed.

On tear-bar models, paper is fed to the tear-bar position.

Paper is fed to cutting position, then a partial cut is executed.

On tear-bar models, paper is fed to the tear-bar position.

0, 48

1, 49

2, 50

3, 51

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 99

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275