Samsung SRP-275 Manual do Operador descarregar pdf (Página 62)

5-555-54

GS ( E pL pH fn d1 d2 <Function 1>

[Format] ASCII GS ( E pL pH fn d1 d2

Hex 1D 28 45 03 00 01 49 4E

Decimal 29 40 69 3 0 1 73 78

[Range] (pL + pH x 256) = 3 (pL = 3, pH = 0)

fn = 1

d1 = 73

d2 = 78

[Description] This command changes the printer into the user setting mode.

[Notes] This command is valid only at the beginning of the line.

When the printer goes into the user setting mode, it transmits a mode,

it transmits a "mode change notice" back to the host.

GS ( E pL pH fn d1 d2 d3 <Function 2>

[Format] ASCII GS ( E pL pH fn d1 d2 d3

Hex 1D 28 45 04 00 02 4F 55 54

Decimal 29 40 69 4 0 2 79 85 84

[Range] (pL + pH x 256) = 4 (pL = 4, pH = 0)

n = 2

d1 = 79

d2 = 85

d3 = 84

[Description] Ends the user setting mode, and the printer performs a software reset.

[Notes] This function is performed when the printer is in user setting mode.

After the software reset, the printer goes into the power on state.

Executing this function enables setting values set in user setting mode

(such as memory switch or customize value).

Be sure to execute this function after changing all the setting values.

When it has executed this function, send the next commands after

checking the mode change notice.

See previous [Notes for transmission process] for process sending

data group.

Transmit data

Header

Identifier

NUL

Hex

37H

20H

00H

Decimal

Data quantity

1 byte

CONTROL COMMANDS LIST

CHAPTER 5

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 62

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275