The basic ASB statuses, corresponding to each bit for n are as follows:
5-695-68
GS a
[Name] Enable/disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 ≤ n ≤ 255
[Default] When DIP Switch or Memory Switch (BUSY condition) is Off: n = 0
When DIP Switch or Memory Switch (BUSY condition) is On: n = 2
[Description] Enables or disables basic ASB (Automatic Status Back) and specifies the
status items to include, using n as follows:
Bit Off/On Hex Decimal Status for ASB
4
5
6
7
Off
On
Off
On
Off
On
Off
On
-
-
-
-
00
01
00
02
00
04
00
08
-
-
-
-
0
1
0
2
0
4
0
8
-
-
-
-
Drawer kick-out connector pin 3 status disabled.
Drawer kick-out connector pin 3 status enabled.
On-line/off-line disabled.
On-line/off-line enabled
Error status disabled.
Error status enabled.
Paper sensor status disabled.
Paper sensor status enabled.
Undefined.
Undefined.
Undefined.
Undefined.
[Notes] ASB is the function that transmit the status of [cover open/close], [Online/
Offline] from the printer automatically. It is called [ASB function] and the
status is [ASB status]. If you use ASB, application can acquire the printer
change in a real-time and passively.
Select any status enabled (except n = 0) and basic ASB starts. Then
transmit the current basic ASB status. After that, while ASB is active the
selected enabled basic ASB status is transmitted whenever the status
changes.
When n = 0, basic ASB is disabled. When ASB is disabled, basic ASB
status is not transmitted.
Multiple status items can be selected.
When ASB is active, ASB status is transmitted whenever the status changes
even if ESC = is not selected.
This command setting is effective until ESC @ is executed, the printer is
reset or power is turned off.
During Block data [header - NUL] transmission, ASB is disabled temporarily.
Therefore you cannot get the printer status change through ASB status
when block data [header - NUL] is transmitted.
Any basic ASB status represents the enabled status whenever the status
changes. Therefore the disabled status items may change, because each
status transmission represents the current status.
n ASB status
Bit
2
3
Function
Drawer kick-out
connector status.
Online/offline
status.
Error status.
Roll pap
sensor
status
Panel switch
status.
Bit
Bit 3 of the first byte
Bit 5 of the first byte
Bit 0 and 1 of the third
byte[Note]
Bit 2 and 3 of the third
byte[Note]
Bit 2 of the second byte
Bit 3 of the second byte
Bit 5 of the second byte
Bits 2 and 3 of the third byte
Status
Drawer kick-out connector
pin 3 status
Online/ offline status.
Cover status.
Paper is being fed by paper
feed button status.
Waiting for online recovery
status.
Paper near-end sensor
status.
Mechanical error status.
Auto cutter error status.
Unrecoverable error status.
Automatically recoverable error
status.
Paper near-end sensor
status.
Paper end sensor status.
CONTROL COMMANDS LIST
CHAPTER 5
0
1
2
3
0
1
6
Bits 0 and 1 of the third byte
Bit 1 of the second byte
Bit 6 of the second byte
Bit 0 of the second byte
Paper end sensor status.
Paper feed status
Bit 6 of the first byte
Bit 2 of the first byte
(6 páginas)
(116 páginas)
(107 páginas)
(143 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais