Samsung SRP-275 Manual do Operador descarregar pdf (Página 44)

5-18

ESC 2

[Name] Select default line spacing

[Format] ASCII ESC 2

Hex 1B 32

Decimal 27 50

[Range] None

[Default] None

[Description] Sets the line spacing to the "default line spacing."

[Notes] - The default line spacing is about 4.23 mm (1/6 inch),

which is equivalent to 12 dots.

- Selected line spacing is effective until ESC 3 is executed,

ESC @ is executed, the printer is reset, or the power is turned off.

ESC 3

[Name] Set line spacing

[Format] ASCII ESC 3 n

Hex 1B 33 n

Decimal 27 51 n

[Range] 0 ≤ n ≤ 255

[Default] Amount of line spacing which corresponds to "default line spacing."

(See ESC 2 for the default line spacing.)

[Description] Sets the line spacing to n x (vertical motion unit).

[Notes] The vertical motion unit is 0.176 mm (1/144 inch) (the minimum movement

amount). This value equals a half dot pitch. The default value is (n = 24).

When the motion unit is changed after the line spacing is set, the line

spacing setting does not change.

Selected line spacing is effective until ESC 2 is executed,

ESC @ is executed, the printer is reset, or the power is turned off.

ESC =

[Name] Select peripheral device

[Format] ASCII ESC = n

Hex 1B 3D n

Decimal 27 61 n

[Range] 0 ≤ n ≤ 3

[Default] n = 1

[Description] Selects the device to which the host computer sends data, using n as follows:

[Notes] When the printer is disabled, it ignores all received data and commands

with the exception of ESC = and real-time commands.

If ASB is enabled when the printer is disabled by this command, the printer

transmits the ASB status message whenever the status changes.

See the description of GS a for ASB function.

Settings of this command are effective until the printer is reset, or the power

is turned off.

5-19

ESC <

[Name] Return home

[Format] ASCII ESC <

Hex 1B 3C

Decimal 27 60

[Range] None

[Default] None

[Description] Moves the print head to the standby position.

[Notes] The standby position is on the left.

The command rechecks the standby position ;

therefore, the print position might be shifted before and after checking the

standby position.

Function

Enables the printer

Disables the printer

Enables the printer

CONTROL COMMANDS LIST

CHAPTER 5

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275