Samsung SRP-275 Manual do Operador descarregar pdf (Página 38)

5-6

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 9

[Range] None

[Default] None

[Description] Moves the printing position to the next horizontal tab.

[Notes] This command is ignored unless the next horizontal tab position

has been set.

Horizontal tab positions are set by ESC D.

If the next horizontal tab position exceeds the printing area,

the printer sets the printing position to [Printing area width + 1].

When underline mode is turned on, the underline will not be printed

under the tab space skipped by this command.

[Name] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Range] None

[Default] None

[Description] Prints the data in the print buffer and feeds one line.

[Notes] The amount of paper fed per line is based on the value set using the

line spacing command (ESC 2 or ESC 3).

After printing, the printing position moves to the beginning of the line.

5-7

[Name] Print and carriage return

[Format] ASCII CR

Hex 0D

Decimal 13

[Range] None

[Default] None

[Description]

[Notes] With a serial interface, the command performs as if auto line feed is

disabled.

With a parallel interface, enabling or disabling the auto line feed can be

selected by the DIP Switch (DSW2-1).

After printing, the printing position moves to the beginning of the line.

When auto line feed is enabled (DSW 2-1)

(Only available with Parallel Interface)

Executes printing and one line feed as LF

Prints data in print buffer and does not feed the

paper

CONTROL COMMANDS LIST

CHAPTER 5

5.4.2

Commands description for Epson mode (TM-U220)

When auto line feed is disabled

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275