Samsung SRP-275 Manual do Operador descarregar pdf (Página 52)

5-35

ESC v

[Name] Transmit peripheral device status.

[Format] ASCII ESC v

Hex 1B 76

Decimal 27 118

[Description] Transmit the status of paper sensor(s) as 1 byte of data.

[Notes] See GS r for details on status transmission.

The peripheral device status to be transmitted is as follows:

When the paper end sensor detects a paper-end, the printer goes offline

and does not execute this command. Therefore, bits 2 and 3 of the paper

sensor status do not transmit a paper-end status.

5-34

ESC u

[Name] Transmit peripheral device status.

[Format] ASCII ESC u n

Hex 1B 75 n

Decimal 27 117 n

[Range] n = 0, 48

[Default] Transmit the peripheral device status of 1 byte.

[Notes] The peripheral device to be transmitted is as follows:

Bit Binary Hex Decimal Status

1-3

5,6

Drawer kick-out connector pin 3 LOW.

Drawer kick-out connector pin 3 is HIGH.

Undefined.

Not used. Fixed to Off.

Undefined.

Not used. Fixed to Off.

Bit Binary Hex Decimal Status

5,6

Off

Paper near end sensor: paper adequate.

Paper near end sensor: paper near end.

Paper end sensor: paper present.

Paper end sensor: paper not present.

Not used. Fixed to Off.

Undefined.

Not used. Fixed to Off.

CONTROL COMMANDS LIST

CHAPTER 5

0,1

2,3

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 52

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275