Samsung SRP-275 Manual do Operador descarregar pdf (Página 65)

5-615-60

GS ( E pL pH fn a d1...dk <Function 11>

[Format] ASCII GS ( E pL pH fn a d1...dk

Hex 1D 28 45 pL pH 0B a d1...dk

Decimal 29 40 69 pL pH 11 a d1...dk

[Range] 3 ≤ ( pL + pH x 256) ≤ 8 (3 ≤ pL ≤ 8, 0 ≤ pH ≤ 255)

n = 11

1 ≤ a ≤ 4

48 ≤ d ≤ 57 [a = 1]

48 ≤ d ≤ 50 [a = 2]

d = 48, 49 [a = 3]

d = 55, 56 [a = 4]

1 ≤ k ≤ 6

[Default] d1...dk = 9600 [a = 1]

d = 48 [a = 2]

d = 48 [a = 3]

d = 56 [a = 4]

[Description] Changes the condition of the serial interface defined by a.

Function

Select no parity

Select odd parity

Select even parity

Function

Select Flow control of DTR/DSR

Select Flow control of XON/XOFF

Baud rate (a = 1) is specified by number.

Example: When defining 19200 bps: 5 bytes as 19200 (Hexadecimal =

31H, 39H, 32H, 30H,30H / Decimal= 49, 57, 50, 48, 48)

Parity (a = 2) is specified by d as follows:

Flow control (a = 3) is specified by d as follows:

Function

Select 7 bits length

Select 8 bits length

Bit length ( a = 4) is specified by d as follows:

[Notes] It is recommended that the DIP Switch be used to change communication

condition.

-If the communication control between host and printer does not

correspond, the printer cannot process data from the host normally, and the

host cannot receive data from the printer normally.

This function works in user setting mode.

This function works with serial interface printers.

The communication condition set by this function is enabled by executing

Function 2 or restarting the printer. It is necessary to change the

communication condition of the host to be the same as the printer to

communicate with the printer.

To enable the communication condition set by this function, set DSW 1-5 to

ON (Interface condition selection).

-The serial communication setting is also specified by DIP switch.

-4 baud rates are selectable by this command. [ 2400 , 4800 , 9600 ,19200 ]

-Setting of this function can be changed by Memory switch setting mode by

the panel switch operation.

Item

Baud rate

Parity

Flow control

Bit length

CONTROL COMMANDS LIST

CHAPTER 5

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 109 110

Comentários a estes Manuais

Sem comentários

Samsung SRP-275 Manual do Operador Página 65

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Samsung SRP-275