Samsung SRP-275 Manual do Operador descarregar pdf (Página 81)

5-1395-138

ESC % n

[Name] Specifying/Canceling the download character set

[Format] ASCII ESC % n

Hex 1B 25 n

[Description] This command selects/deselects the download character set. The download

characters cannot be printed by simply defining them with the above-

mentioned ESC & 0 command. To print them, send this command to the

printer.

ESC / n "data" CR or LF

[Name] Defining the message

[Format] ASCII ESC / n

Hex 1B 2F n

[Range] 1 ≤ n ≤ 10

[Description] This command can define up to a 50-byte message in one line. If the value of

n is specified beyond the range, the data following n will be treated as the print

data. Once the message is defined, it remains valid until it is redefined. The

data should end with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the

subsequent data will be treated as the print data. Once the message is

defined, it remains valid until it is redefined or the download deletion command

(ESC DC2 n1 n2) is executed.

Download Character Set

ESC & <0> n1 n2 [m0 m1 m5 m6 m7 m8 m9] n2 — n1 +1

[Name] Defining the download character set

[Format] ASCII ESC & <0> n1 n2 [m0 m8 m9] n2-n1+1

Hex 1B 26 00 n1 n2 [m0 m8 m9] n2-n1+1

[Range] 32 ≤ n1 ≤ n2 ≤ 255, m0 = 0 or m0 = 128

[Description] This command defines he download characters. n1 is a character code to start

definition and n2 is to end definition, respectively. When defining only one

character, set n1 = n2. You can define the ASCII codes ranging from 32 to

255. Once the download characters are defined, they remain valid until they

are redefined or the download deletion command (ESC DC2 n1 n2) is

executed.

CONTROL COMMANDS LIST

CHAPTER 5

Deselect

Select

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 109 110

Sem comentários

Samsung SRP-275 Manual do Operador Página 81