5-135-12
DLE DC4 (fn = 1)
[Name] Generate pulse at real-time
[Format] ASCII DLE DC4 n m t
Hex 10 14 n m t
Decimal 16 20 n m t
[Range] n = 1
m = 0, 1
1 ≤ t ≤ 8
[Description] Outputs the pulse specified by t to connector pin m as follows in real time:
[Notes] This is a real-time command that the printer executes upon receiving it.
Note the following when using this command.
-If this command is embedded within the code string of another command,
it is processed as a parameter of the other command, and the print result is
not correct.
-If another command (such as bit image or defined data) has a code string in
a parameter that is the same as this command, the printer starts processing
this command.
This command is ignored in the following states:
-In error status
-When the pulse is being output to the connector pin
(during processing of ESC p and DLE DC4)
-During transmission of block data (Header ~ NUL)
-When this command is disabled by GS (D)
The pulse ON time is [ t x100 ms] and the OFF time is [ t x100 ms]
m
0
1
Connector pin
Drawer kick-out connector pin 2
Drawer kick-out connector pin 5
ESC SP
[Name] Set right-side character spacing
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Sets the right-side character spacing to n x (horizontal or vertical motion unit).
[Notes] - When characters are enlarged, the character spacing is n times normal value.
The character spacing for double-width mode is twice the normal value.
ESC !
[Name] Select print mode(s)
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
[Range] 0 ≤ n ≤ 255
[Default] n = 1
[Description] Selects or cancels print modes collectively (emphasized, double-height,
double-width, underline) using n as follows:
Bit Off/On Hex Decimal Status
1,2
6
Off
On
-
Off
On
Off
On
Off
On
Off
Off
On
00
01
-
00
08
00
10
00
20
-
00
80
-
0
8
0
16
0
32
-
0
128
Character font A(9x9)selected
Character font B(7x9) selected
Undefined
Emphasized mode not selected
Emphasized mode selected
Double-height mode not selected
Double-height mode selected
Double-width mode not selected
Double-width mode selected
Undefined
Underline mode not selected
Underline mode selected
CONTROL COMMANDS LIST
CHAPTER 5
0
3
4
5
7
(6 páginas)
(116 páginas)
(107 páginas)
(143 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais