Samsung SRP-275 Manual do Operador Página 94

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 93
5-975-96
ESC Q n
[Name] Set right margin
[Format] ASCII ESC Q n
Hex 1B 51 n
Decimal 27 81 n
[Range] 2 n Maximum printable digits 255
[Default] Maximum printable digits
[Description] This command sets the printable region (current ANK character pitch x n)
using the left edge as a reference after printing data in the line buffer.
Upside-down printing uses the same left edge as a reference.
Setting this command partway will print the data in the line buffer at that point
and perform a line feed. It will take affect from the next line.
Character spacing is included in the character pitch but is unaffected by
expansion settings.
The right margin set using this command is unaffected by changing the
character pitch.
The printable region within the defined range must be at least a minimum of
18 dots for the right margin (*1). If the printable region as set by the left and
right margins is smaller than one character, including the space between
characters, printing is not possible.
(*1) More than 4 characters of 7 x 9 fonts, and more than 3 characters in
7 x 9 fonts (when character space = 0).
CONTROL COMMANDS LIST
CHAPTER 5
ESC l n
Name] Set left margin
[Format] ASCII ESC l n
Hex 1B 6C n
Decimal 27 108 n
[Range] 0 n (Right margin -2) 255
[Default] n = 0
[Description] This command sets the left margin (current ANK character pitch x n) using
the left edge as a reference after printing data in the line buffer.
Upside-down printing uses the same left edge as a reference.
Setting this command partway will print the data in the line buffer at that point
and perform a line feed. It will take affect from the next line.
Character spacing is included in the character pitch but is unaffected by
expansion settings.
The left margin set using this command is unaffected by changing the
character pitch after being set.
The left margin must be at least a minimum of 18 dots with the right margin
(*1). If the printable region as set by the left and right margins is smaller than
one character, including the space between characters, printing is not
possible.
(*1) More than 4 characters of 7 x 9 fonts, and more than 3 characters in
9 x 9 fonts (when character space = 0).
Vista de página 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 109 110

Comentários a estes Manuais

Sem comentários