
2-8
Operation Manual
On/O
Turns the system on/o.
Patient
Displays the Patient Information screen for patient selection and information entry.
End Exam
Finishes the exam of the currently selected patient and resets the related data.
SONOVIEW
Runs SONOVIEW which is the image ling program.
Probe
This is used to change another probe.
Report
Displays the Report screen that shows the measurement results of the current application
and other information.
Preset
Displays the preset menu.
2D
Use this button to enable 2D Mode. Pressing this button in 2D mode does not disable the
mode. Pressing it in Combined Mode switches to 2D Mode.
M
Use this button to enable/disable M Mode.
Color
(Option)
Use this button to enable/disable Color Doppler Mode.
PD
(Option)
Use this button to enable/disable Power Doppler Mode.
PW
(Option)
Use this button to enable/disable PW Spectral Doppler Mode.
Har.
This is used to turn Harmonic Imaging on. Press this button again to turn the mode o. This
button is only activated with the specic probe.
Freq.
Press the button to change frequency for the probe.
Select Res, Pen or Gen. The selected frequency will be displayed in the title area.
Zoom
This is used to start or nish the Zoom Mode. The Zoom Navigation Box is displayed on the
user information area.
Dual
Use this button to enable Dual Mode.
Focus
Use this switch to adjust the focus position. The focus position changes on the ruler as you
adjust its position.
Depth
Use this switch to adjust the scanning depth for the selected image. The depth information
changes in the Title area as you adjust the depth.
Calc
Starts measurements by application. The measurement menu is displayed on the left side of
the screen.
Caliper
Starts to measure distance, circumference, area, and volume. The current measurement item
is displayed on the left side of the screen.
Comentários a estes Manuais