
5-28
Operation Manual
Vascular Calculations
The measurement method for each item is the same as for basic measurement.
NOTE:
X
For information on basic measurement methods, refer to ‘Basic Measurements’ and ‘Common
Measurement Methods’ in this chapter.
Vascular Measurement Menu
Item Mode Method Unit
Auto IMT 2D Calculation after distance measurement
Auto IMT (Optional)
This function allows you to take IMT measurement easily and quickly.
NOTE:
Auto IMT is available only under the following conditions:
X
Probe: Linear Probe
X
Application: Vascular
X
Diagnosis Mode: 2D, C or PD Mode
Auto IMT Measurement
1. After checking the probe and the application, start a carotid scan.
2. If the desired images are obtained, press Freeze. Use the trackball to select an image for IMT
measurement.
3. Tap Auto IMT on the touch screen’s soft menu. The Auto IMT screen will be displayed.
4. Touch the start and end points on the image, and drag to set a location for IMT measurement.
5. To measure again, tap Auto IMT on the soft menu.
Comentários a estes Manuais