Samsung H60 Manual do Utilizador descarregar pdf (Página 11)

6-3

Chapter 6 Starting Diagnosis

System Power

Boot up the system for use.

CAUTION: Make sure to connect the probes and peripheral devices that will be used before

powering on the system. If you attempt to connect them during system use, it may lead to patient

injury or irreparable damage to the console.

Turning the Power On

Press the On/Off button when the power is off. Booting begins, and the product logo appears on the

screen. When booting is completed, the 2D mode screen appears in End Exam status.

CAUTION: Before starting the diagnosis, you must register the patient information.

NOTE:

X

If the power switch near the power connection port on the rear panel of the product has been

switched off, wait for 10 seconds before turning on the product.

X

Do not press keyboard keys or buttons while booting is in progress. Doing so may cause the

system to malfunction.

X

If you turn off the system forcefully and then turn it back on, the system may turn on and off

momentarily. This is a characteristic of the Intel® PC main board, and not a system error.

Shutting Down the System

Press the On/Off button while using the system to initiate shutdown.

CAUTION:

X

Pressing the On/O button for longer than five seconds will immediately turn the power off

and result in damage to the hard disk. Please refrain from such use unless there is a serious

emergency.

X

To ensure that the product is safely cut off from electrical power, always set the power switch at

the rear of the product to the Off position when the product is not in use.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 255 256

Sem comentários

Samsung H60 Manual do Utilizador Página 11