
4-43
Chapter 4 Diagnosis Modes
■
Step Angle
Use the Soft Menu dial-button [2] to set the rotation angle by step for an image. Valid values are 1, 3, 5
and 15˚.
Tips!
The Dierence between Rotation Angle and Step Angle
A Cine image rotates to the angle set in Rotation Angle in increments as set in Step Angle. For
example, if Rotation Angle is set to 360˚ and Step Angle is set to 15°, 3D Cine rotates to 360° using
15˚ steps.
■
Rotate Axis
Use the Soft Menu dial-button [3] to set the rotation direction to X or Y.
■
Start Angle
Use the Soft Menu dial-button [4] to set the start point of a Cine image. Valid values are -180 to -1. If
Start Angle is set, Rotation Angle is disabled.
■
End Angle
Use the Soft Menu dial-button [5] to set the end point of a Cine image. Valid values are 1 - 180. If End
Angle is set, Rotation Angle is disabled.
■
Mix
Use the Soft Menu dial-button [6] to set the rendering mix. Valid values are 0 - 100.
■
Calculate
Press the Soft Menu dial-button [6]. Start conguring a Cine image with the specied settings.
■
3D Cine
Specify settings required for Cine execution.
■
Play Mode
Use the Soft Menu dial-button [1] to select how 3D Cine is played.
▶
Loop: Continues to play 3D Cine in one direction repeatedly.
▶
Yoyo: Plays 3D Cine in one direction until the end is reached and then continues to play it in the
reverse direction.
I want to learn how to do angle correction on PW Doppler on my machine.
How do I assess PW angle cursor?
I don't want to join the group.