Samsung SONOACE X6 Manual do Utilizador descarregar pdf (Página 11)

Chapter 5.Measurements and Calculations 5 - 11

Distance Measurement

▐ 2D Distance (Line)

This is a basic measurement that is available in all diagnosis modes. You can specify two

points in a 2D image and measure the straight distance between them.

You can measure up to 4 distances. When taking more than one measurement, use

measurement cursors with different shapes (+, X, #, *) to differentiate them.

1. Select the Flexible Soft button [1] Distance. “2D Distance” is displayed in the user

information area.

2. Use the Trackball and the Set button on the control panel to specify both end points of

the measurement area.

- Place the cursor at a desired position with the Trackball, and press the Set button.

※

Tip! Repositioning Point

Pressing the Change button before pressing the Set button to complete positioning resets

the position of a point just set.

3. If you specify both end points, the distance between them will be automatically

calculated.

4. When the measurement is finished, its result is shown on the screen.

- The measured distances are shown as “Dist.” and can be differentiated with their

measurement cursor. The ratio (+/x, #/*) and average for each measurement data is

calculated and displayed as a percentage.

A new measurement cursor appears. When more than 4 measurements are taken,

measurements are deleted in the order in which they have been taken.

▐ 2D Distance (Trace)

It is a basic measurement that is available in all diagnosis modes. You can specify a point in

a 2D image and trace a curve from that point to measure the distance between them.

You can measure up to 4 distances. When taking more than one measurement, use

measurement cursors with different shapes (+, X, #, *) to differentiate them.

1. Select the Flexible Soft button [1] Line Trace. “2D Line Trace” is displayed in the

user information area.

2. Use the Trackball and the Set button on the control panel to specify the start point of

the measurement area.

- Place the cursor at a desired position with the Trackball, and press the Set button.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Sem comentários

Samsung SONOACE X6 Manual do Utilizador Página 11