
5-140
Operation Manual
Transferring Report
Press Transfer on the report screen. Transfer the report data using an RS232C cable. A button is created when
a measurement is completed.
To use this button,
1.
Connect the RS232C cable with the console.
2.
Set
Utility
>
Setup
>
Peripherals
>
COM
as ‘Open Line Transfer’.
Stress Echo Report
Pressing the
Report
button on the control panel while measuring the Stress Echo opens the Stress Echo
Report.
NOTE:
X
The Stress Echo Report cannot be edited.
X
Otherwise, it may be used in the same way as general reports.
X
For information on the Stress Echo, please refer to 'Chapter 7. Utility'.
[Figure 5.25 Stress Echo Report]
Comentários a estes Manuais