Samsung SCR-3000 Manual do Utilizador descarregar pdf (Página 47)

4-15

DIGITAL VIDEO RECORDER

The following illustrates the intial setting of the SYSTEM SETUP menu.

① PASSWORD

Set the system password. You can enter a 4-digit number and the initial set value is 0000.

② PASSWORD LOCK

If you set this to ON, the system will ask for a password, which was set in PASSWORD,

when your press the MENU ( ) button or when you attempt to cancel the recording lock

while recording or when you attempt to remove the video tape from the video deck. If the

password is invalid, you will not be able to finish the desired operation. If you set this to

OFF, the system will not ask for a password for any of the operations above.[ON/OFF]

➂ HDD ERASE

If you set to ON and exit the menu, the system will delete all data stored on the HDD.

[ON/OFF]

➃ FACTORY RESET

If you set to ON and finish the menu, all settings will be restored to their factory default set-

tings. However, the data on the HDD will not be deleted. After RESET The message, “DO

YOU REBOOT SYSTEM?” will be displayed. Select YES to reboot the system. [ON/OFF]

➄ MENU SCREEN

If this is set to DARK GRAY, the background of the screen becomes darker when the

MENU button is pressed and you will not be able to see the characters clearly. If set to OFF,

you can see the current video clearly even when the MENU button is pressed.

[DARK GRAY/OFF]

Caution

Verify once again that is is OK to delete the data, as deleted data cannot be restored.

System Setup

SYSTEM SETUP

PASSWORD ****

PASSWORD LOCK OFF

HDD ERASE OFF

FACTORY RESET OFF

MENU SCREEN DARK GRAY

LANGUAGE ENGLISH

IR REMOCON OFF

MULTIPLEXER WITHOUT

MULTIPLEXER SELECT SAMSUNG SDM-160

MOVE=[/❷/

➛

❿

] SELECT=[ ] EXIT=[MENU]

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 93 94

Sem comentários

Samsung SCR-3000 Manual do Utilizador Página 47