Samsung SCR-3000 Manual do Utilizador descarregar pdf (Página 40)

4-8

➄ DISK END MODE

● If you select STOP, recording will stop when you consume the full HDD space.

● Setting this to OVERWRITE will continue to record the current data by overwriting the

previous data. The relative positions where the recorded data are being stored in the HDD

will be indicated on the screen in a bar format. If the DISK END MODE is set to STOP,

in addition, the remaining HDD capacity will be indicated in percentage (%).

[OVERWRITE/STOP]

➅ DISK END BUZZER

If set to ON, the Buzzer will sound when the HDD is full during the recording; if set to

OFF, the Buzzer will not sound. DISK END MODE needs to be set to STOP for activation.

[ON/OFF]

➆ RECORD TIME MARK

If set to ON, the recording time will be displayed during playback; if set to OFF, it will not

be displayed. [ON/OFF]

⑧ TIME MARK POSITION

Set the location on the screen where the time of recording will be displayed during

playback. Set to LEFT to display it on the bottom left of the screen, or set to RIGHT to

display it on the bottom right of the screen. [LEFT/RIGHT]

Note

Set DVR input to VCR PB mode to show video in live video on screen. You can record

the videotape into hard disk drive while playing it. Note that OSD will not display while

recording. This is normal.

Please note that you cannot open VCR menu while setting the DVR input to VCR PB

mode. Timer record setting in DVR menu is disabled as well.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 93 94

Sem comentários

Samsung SCR-3000 Manual do Utilizador Página 40