
17
EN
Parts and Features (Continued)
Safety shuto
If one of the cooking zones is not switched o or the heat setting is not adjusted after an extended
period of time, that particular cooking zone will automatically switch itself o.
Any residual warmth will be indicated with
(for “hot”) in the digital displays corresponding to the
particular cooking zones.
The cooking zones switch themselves o at the following times.
Cooking setting 1 - 2 After 6 hours
Cooking setting 3 - 4 After 5 hours
Cooking setting 5 - 6 After 3 hours
Cooking setting 7 - 9 After 1 hour
If the Hob is overheated because of abnormal operation,
will be displayed.
And the Hob will be switched o.
Should one or more of the cooking zones switch o before the indicated time has
elapsed, see the section “Troubleshooting”.
Other reasons why a cooking zone will switch itself o
All cooking zones will immediately switch themselves o if liquid boils over and lands on the
control panel.
The automatic shuto will also be activated if you place a damp cloth on the control panel. In both
of these instances, the appliance will need to be switched on again using the main power sensor
after the liquid or the cloth has been removed
.
Residual heat indicator
When an individual cooking zone or the hob is turned o, the presence of residual heat is shown
with an
(for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking
zone has been switched o, the residual heat indicator goes out only after the cooking zone has
cooled.
You can use the residual heat for thawing or keeping food warm.
Important: As long as the residual heat indicator is illuminated, there is a risk of burns.
Important: If the power supply is interrupted, the
symbol will go out and information
about residual heat will no longer be available. However, it may still be possible to burn
yourself. This can be avoided by always taking care when near the hob.
C61R2AEEP_BOL_DG68-00125D-04_EN_161107.indd 17 2016-11-07 �� 10:57:11
Comentários a estes Manuais