Samsung C61R2AAST Manual do Utilizador descarregar pdf (Página 331)

Installing the Hob (Continued)

Connecting to the mains power supply

Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating

plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.

Shut o power to circuit before connecting wires to circuit.

The heating element voltage is AC 230 V~. The appliance also works perfectly on older networks with AC

220V~.

The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the

mains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earth

leakage trips or fuse.

A type H05SS - F (180 °C) cable or one of a higher grade must be used as the mains connecting cable.

Rated current of appliance (A) Nominal cross-sectional area (mm

)

1N~

> 25 and ≤ 32 ≥ 2.5

2N~ > 10 and ≤ 16 ≥ 1.5

The connection must be carried out as shown in the diagram. The connecting links should be ﬁtted according

to the appropriate connection diagram.

The earth lead is connected to terminal. The earth lead must be longer than leads carrying electric current.

The cable connections must be made in accordance with regulations and the terminal

screws tightened securely.

The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing ﬁrmly

(locking into place). Before switching on for the ﬁrst time, any protective foil or stickers must be removed from

the ceramic glass surface.

Once the hob is connected to the mains supply, check that all cooking zones are ready

for use by brieﬂy switching each on in turn at the maximum setting.

When the hob is powered on for the ﬁrst time, all displays light and the child safety lock

is activated.

< IN ~ >

L: Brown

N: Blue

PE: Green

Warning: Pay attention (conformity) to phase and neutral allocation of house

connection and appliance (connection schemes); otherwise, components can be

damaged.

Warranty does not cover damage resulting from improper installation.

C61R2AEEP_BOL_DG68-00125D-04_EN_161107.indd 11 2016-11-07 �� 10:57:08

1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 351 352

Sem comentários

Samsung C61R2AAST Manual do Utilizador Página 331