
20
Pairing the Samsung Smart Control
To use the Samsung Smart Control with the TV, you must first pair it to the TV via Bluetooth.
"
The Samsung Smart Control can only connect to one TV at a time.
1.
While the TV is not being turned on, point Samsung Smart Control at the remote control sensor
of the TV and press the TV button to turn the TV on.
"
The remote control receiver’s location may vary depending on the model.
2.
When the TV turns on, the Samsung Smart Control will be connected to the TV automatically.
Reconnecting the Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this
may be due to insufficient battery power. If the problem persists, the Samsung Smart Control restore
pairing with the TV.
1.
Press both the 복귀 button and the 방송안내 button simultaneously for more than 3 seconds.
"
You have to control Samsung Smart Control apart from TV within 30cm ~ 4m. And, you must place
Samsung Smart Control toward to TV's remote control receiver.
2.
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.
<Connection attempt and completion icons>
Comentários a estes Manuais