Samsung SEK-2000 Manual do Utilizador descarregar pdf (Página 160)

154

Anynet+ (HDMI-CEC) isn't working.

There is something

wrong with the TV.

Try this!

Anynet+ does not work.

Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+

devices only.

Check if the power cord of the Anynet+ device is properly connected.

Check the cable connections of the Anynet+ device.

Go to System and see if Anynet+ (HDMI-CEC) has been set to On.

Check whether the TV remote control is in TV mode.

Check whether the remote control is Anynet+ compatible.

Anynet+ may not function when some other functions are active, including ... (Channel

Search, Smart Hub, Start Up, etc.)

If you have disconnected and then reconnected the HDMI cable, scan for devices again

or turn your TV off and on.

I want to start Anynet+.

Check if the Anynet+ device is properly connected to the TV and then navigate to the

System menu to see if Anynet+ (HDMI-CEC) is set to On.

Once verified, press the 간편메뉴 button to display the Tools list. Select Anynet+

(HDMI-CEC) from the list and then a device.

On the Samsung Smart Control, press the 버튼더보기 button. You can select the 간

편메뉴 on the on-screen remote screen.

I want to exit Anynet+.

Select View TV from the Anynet+ menu.

Select a non-Anynet+ device from the Source list.

The message "Connecting

to Anynet+ device..."

or "Disconnecting from

Anynet+ device" appears

on the screen.

You cannot use the remote control when you are configuring Anynet+ or switching

to a viewing mode. Use the remote control after the TV has completed the Anynet+

configuration or has switched to a viewing mode.

The Anynet+ device

won't play.

You cannot use the play function when Setup is in progress.

The connected device is

not displayed.

Check whether the device supports Anynet+.

Check whether the HDMI cable is properly connected.

Go to System and see if Anynet+ (HDMI-CEC) has been set to On.

Scan for Anynet+ devices again.

Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the

device is connected to your TV with an HDMI cable. Some HDMI cables may not

support Anynet+.

If the connection is terminated because there has been a power failure or the HDMI

cable has been disconnected, please scan for the device again.

The TV audio is not

being played through the

receiver.

Connect an optical cable to the TV and the receiver.

ARC enables digital sound to be outputted via the HDMI (ARC) port.

However, ARC is only available when the TV is connected to an audio receiver that

supports ARC.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 188 189

Comentários a estes Manuais

Sem comentários

Samsung SEK-2000 Manual do Utilizador Página 160

Comentários a estes Manuais

Manuais e produtos relacionados com não Samsung SEK-2000