Samsung SA8000 SE Manual do Utilizador descarregar pdf (Página 11)

Chapter 5.Measurements and Calculations 5 - 11

Measurement in M Mode

▐ M Distance: measures the distance, time interval, speed between two

points

The distance measurement method in M Mode is the same as that used in 2D Mode.

M Mode shows the changes occurring in the image according to time. If the distance (cm

or mm) between two points is measured, the time interval (sec), speed (cm/s or mm/s), etc.

can be checked.

A maximum of four sets of measurements can be displayed at one time.

1. Press the Caliper button, and the ‘M Distance’ item appears on the left side of the

screen.

2. Set two points using the cursor and measure the distance between them. For more

information about distance measurement, refer to ‘2D Distance (Line) Measurement’

in this chapter.

3. After the position setup, the measurement result is shown on the screen.

4. A new cursor appears for a new measurement.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

Sem comentários

Samsung SA8000 SE Manual do Utilizador Página 11