44
The gas connection must be installed in
compliance with applicable regulations in the
country of installation.
•
Gas distributed by pipe, natural
gas
For your safety, you must choose from the
three following connection options:
— Connection with a reinforced copper pipe
with screw-on mechanical connectors
(compliant with the G1/2 standard). Make the
connection directly to the end of the elbow
fitted on the appliance.
— Connection with a flexible, wavy metal
hose
(stainless steel)
with screw-on
mechanical connectors
whose service life is
unlimited
(Fig. A).
— Connection with a flexible rubber hose
with
screw-on mechanical connectors
whose
service life is 10 years
(Fig. B).
Warning
When connecting your hob's gas
supply, if you have to change the
direction of the elbow fitted on the
appliance:
①①
Change the gasket.
②②
Screw on the elbow's nut, careful not
to exceed a torque of 17 N.m.
GAS CONNECTION
• Preliminary comments
If your hob is installed above an oven or if proximity to other heating elements poses a threat of
overheating the connection, you must insulate the cable in a rigid pipe.
If a flexible hose or tubing (in the case of butane gas) is used, it should not come into contact
with a moving part of the cabinet, nor should it pass through a location that may become
blocked.
11 //
INSTALLING YOUR APPLIANCE
••
Fig. A
Fig. B
Comentários a estes Manuais