
APRO RUFD GDK-2010 HERMES Series © 2010 APRO Co., Ltd.
6
2. Product Specifications
For all the following specifications, values are defined at ambient temperature and nominal supply voltage unless
otherwise stated.
2.1. System Environmental Specifications
Table- 1: Environmental Specification
Temperature
Standard grade operating temp. / non-operating temp.
Industrial grade operating temp. / non-operating temp.
0°C ~ +70°C / -20ºC ~ +80ºC
-40°C ~ +85°C / -50ºC ~ +95ºC
Humidity Operating & Non-operating: 10% ~ 95% non-condensing
Vibration Operating & Non-operating: 15G compliance to MIL-STD-810F
Shock Operating & Non-operating: 1,500 G compliance to MIL-STD-810F
Remark : MLC USB Flash Disk supports standard operating temperature supports 0° C ~ 70° C and non-operating
temperature is -20ºC ~ +80ºC
2.2. System Power Requirements
Table- 2: Power Requirement
DC Input Voltage (VCC) 100mV max. ripple(p-p) 5V±10% via on-board USB port
NAND flash types SLC MLC
+5V Current
(Maximum average value)
Idle mode : 90 mA (Max.) 90 mA (Max.)
Reading mode : 155 mA (Max.) 160 mA (Max.)
Writing mode : 175 mA (Max.) 180 mA (Max.)
2.3. System Performance
Table- 3: System Performances
Performance
(MB/sec)
Sequent Speed (MB/Sec.)
Read Write
Flash Type SLC MLC SLC MLC
16GB 29.91 NA 29.00 NA
32GB 29.82 29.15 28.85 28.06
64GB 30.12 29.22 29.24 28.49
128GB NA 29.70 NA 28.34
Note:
(1). All values quoted are typically at 25
℃
and nominal supply voltage.
(2). The Max. Performance was tested by SiSoftware Sandra /File Benchmark
Comentários a estes Manuais