Samsung ML-1610 - B/W Laser Printer Especificações descarregar pdf (Página 54)

Alignment and Adjustments

Samsung Electronics

Service Manual

4-9

Code Description

07 Paper Empty Sensor Test :

If activate the Actuator of the PEMPTY Sensor, the left and right of the three LEDs are

on.

Paper Empty Sensor ON/OFF 1st LED ON/OFF

08 Feed & Exit Sensor Test

Test the Feed sensor and Discharge sensor in the same way as '07'.

Feed Sensor ON/OFF 2nd LED ON/OFF

Exit Sensor ON/OFF 3rd LED ON/OFF

09 Cover Open Sensor Test

Test the Cover Open Sensor in th same way as code '07’

Cover Open Sensor ON/OFF1st LED ON/OFF

10 Fuser Test

If the [Enter] button pressed, the right LED is on and temperature of the fuser is up to

READY Mode. If the [Up] button pressed, the middle LED is on and temperature of the

fuser is up to Printing Mode.

If you press the button once more, the left LED is on and temperature of the fuser is up to

overheat Mode.

11 Hot Burn Test

If the [enter] button pressed, the printer is continuously printing without detection.

Turn the power off to stop operation.

12 Cleaning Mode Print Mode

Print the paper to clean the OPC Drum in the Cartridge.

13 THV(+) TRIGGER. ALL HV :

All high voltage output by each HV terminal and LSU and the fan is in operation. In this

mode, electronic resistance of transfer roller and high voltage is detected.

14 PTL Test : (ML-1610 : not design)

Indicates the function of the PTL, same method of the code ‘07’.

15 Fan Test :

Indicates the function of the Fan, same method of the code ‘07’.

16 Manual Pickup Test :

Indicates the function of th Manual Pickup, same method of the code ‘07’.

17 Manual Sensor Test :

Indicates the function of the Manual Sensor, same method of the code ‘07’.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 130 131

Sem comentários

Samsung ML-1610 - B/W Laser Printer Especificações Página 54