Samsung SHS-3420 Especificações

Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property dam

10Symbols Description Symbols DescriptionEnter the User PIN Code (4~12 digits).Repeat the process inside the rectangle.Touch the Card reader with the

11Symbols Description Symbols DescriptionEnter the User PIN Code (4~12 digits).Repeat the process inside the rectangle.Touch the Card reader with the

12Registration Button : This button is used to change Master PIN Code/User PIN Codes/User Cards or the lock settings. It is found below the battery co

13| ProgrammingRegistering a User PIN CodeOpen the bat-tery cover of the Interior Unit and press the [Reg-istration] button briey. Ding do

14Touch the Card reader with the Card to register. Ding dong dangRegistering a User Card Open the battery cover of the Interior Unit and press t

15 Press and hold the [Wake Up] button on the outdoor assembly while the door is locked.Setting the Out-of-Home Security FunctionPress an

16| Miscellaneous InformationReset to Factory DefaultResetting the lock will delete all registered information.Note: After Reset, let the sensor dete

17When the lock doesn’t function correctly, please check the items below.If you can’t resolve the problem, please contact the nearest service center.P

18The door won’t lock automatically when I close it.● Check if Auto Locking is set. When Manual Locking is set, pressing the [Wake Up] button locks t

19Management No. PIN CODE/CARD User Name Management No. PIN CODE/CARD User Name| Management Number Table

2Introduction & Helpful Tips • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

20Item SpecicationsVoltage 4 AA Alkaline 1.5V Batteries (LR6) (6V)Emergency Power Source 9V Battery (6LF22) (purchased separately)Operation Method El

21LIMITED PRODUCT WARRANTYInstallation of the product is considered acceptance of warranty conditionsSEOUL COMMTECH CO., LTD (SEOUL COMMTECH) warran

22Consequently, seller shall have no liability for any personal injury, property damage, or other loss based on a claim the product failed to give war

23| Drilling Template Sheet for 60mm Backset

24| Drilling Template Sheet for 60mm Magnet69.0 69.02.0

25| Drilling Template Sheet for 70mm BacksetWhen installing the 60 mm iron door and 70 mm iron/wood door, a separate magnet sensor is applied.

SEOUL COMMTECHEZON® is a registered trademark of SEOUL COMMTECH Co.,Ltd.Other products’ brand names may be trademarks or registered trademarks of thei

3| Components and ToolsComponents● Exterior Unit● Interior Unit● Interior Mounting Plate● Turn Shaft● Strike● 4 AA Alkaline Batteries● Key Tag● User

4| Door PreparationStep 1. Check Door Status1) This lock supports door thickness of 1-7/32˝ to 1-9/16˝ (31 to 40 mm). 2) Using the provided lock te

5Step 3. Drilling1) Drill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw.2) Drill a 1˝ (25 mm) mo

6Outside| InstallationInside14 5FH+ T4 x 25Connection for video intercom753215486bPH+M4×263FH+ M5 x 20 3bFH+T4x25OH+M4x22FH+ T4 x 256aPH+M4×263c3a3c

71. Insert the deadbolt.1) Insert the deadbolt from the side of the door.2) Rotate the deadbolt so the center hole is horizontally aligned from the

8Touch the Card reader with an Access Card.Successful: Ding dong dang dong Failed: Ding dong ding dongOpening the Door with a PIN Code The number

9 | Programming FeaturesNumber PadDisplay LampWake Up ButtonCard ReaderExternal Power ContactReset ButtonOutside InsideSymbols Description Symbols D