Samsung CS-25M21MA Manual do Utilizador descarregar pdf (Página 3)

exit t1

module t1 0/2

clock_source line

exit t1

module t1 0/3

clock

Work Around:

• Click on Set up

• Click on serial port

• Make sure baud rate is 9600

• You need to change the transmit delay. This is at the bottom of the screen

with the 9600 setting. Set the msec/char box to 100 and the msec/line to

2. Note the screen shot below does not show these 100 and 2 settings.

• Click on Set Up

• Click on Terminal

• Change the receive option to CR and the transmit option to CR + LF.

• Click on Control

• Click on Reset Terminal

7. Issue: Samsung 1000s contain a flash card that can become loose. If it does,

you will get the error below at boot up. Note where it says BOOT instead of

asking for your username and password.

ataWaitReset: request=0x50 sts=0x51 err=0x2

ataCmd error: no media, cmd=0xda

ataWaitReset: request=0x50 sts=0x51 err=0x2

ataCmd error: no media, cmd=0x70

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

Samsung CS-25M21MA Manual do Utilizador Página 3