Samsung CS-25M21MA Manual do Utilizador descarregar pdf (Página 10)

Yellow Alarm: DISABLE

Framing:ESF, LineCode:B8ZS, ClockSource:line, LineMode:CSU, LBO:0 db

FDL: ANSI Unit Protocol enabled ,ATT Unit Protocol disabled ,

CsuDsuType: CSU , Loopback Framing (In-band): Overwrite,

CIRCUIT-ID : Not Configured ,CONTACT-INFO : Not Configured ,

DESCRIPTION : Not Configured , LINK NAME : Not Configured ,

Line Status:

RLOF:OFF RAIS:OFF RLOS: ON RRAI:OFF TAIS:OFF

TRAI:OFF TPtrn:OFF Loop:OFF

Timeslot Map:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

_______________________________________________________________________

|0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |

|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|

Mode : NO-CAS

Ds0-group :

Covad-1#

13. The password field is limited to nine characters max.

VOA Facts :

1. The voice IP is not pingable, except from your lap top and from within the

BRAS router.

2. Remember on the voice side, you sometimes have to re-provision the circuit

in order for the authentication to be successful.

3. You should be able to surf using the voice IPs.

4. The P0 port is for data and the P1 port is for voice.

5. On a BZN VOAN circuit, do not use the same IPs for both voice and data.

Your voice side will not work.

6. For Ethernet ports 0/0 is for data, 0/1 is for voice. The current configs do not

have any vlan'ing created for single port use. This CPE only has one Ethernet

port for data and one for voice. This is very important. If a technician has his

lap top hooked into the wrong port, that technician won’t even be able to ping

the CPE.

LED Info

SYS Solid green System is operating

normally.

Solid red System is not operating normally.

Amber System diagnostic mode.

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Samsung CS-25M21MA Manual do Utilizador Página 10