Samsung JE68-00131B Manual do Operador

JE68-00131B Rev. 1.02 1 http://www.samsungminiprinters.com SRP - 770 Thermal Label Printer

18 II. To use USB interface Microsoft windows basically supports Serial and Parallel interface without installing any port drivers but in case of

20 3) If the following message box appears while your installation, just click on Continue Anyway to continue install procedure. 4) Click on Finis

22 5th -2. In Windows 98 or Me, 1) When you turn the printer power switch first time after installing USB port driver, the OS recognize the printer

24 2. If you meet the following message box while driver installation. Ans.) If you have used the old version auto-installer, that message box is

26 【 Specification 】 Printing method Thermal line printing Dot density 203 dpi (8 dot/mm) Printing width 25.4 ~ 101.6 mm Pa

2 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage.

4 Table of Contents 1. Unpacking & Repacking...5 2. Samsung Label Prin

6 2. Samsung Label Printer Feed Button Cover Peel-off Status IndicatorCover Open/ClosePower SwitchPrinter Head Paper HolderPaper Guid

8 4. Connecting the Interface Cable Universal Serial Bus (USB) Serial Interface RS-232 default setting is 19200 baud, no parity, 8 data

10 6. Setting The Dip Switches 6-1. Setting the Dip Switches The Dip Switches are located on the bottom of the printer. The Dip Switches are used

12 8. The Peel-off Printers can Peel-off a single label. You must remove the label before the printer prints the next label. Open the peel① -off

14 10. Driver Install Guide I. To install SRP770 windows driver 1. Insert CD-ROM included in your printer package then install guide program will

16 5. If you want to use USB interface with SRP770 printer, please select both “SAMSUNG SRP770” and “SAMSUNG USB Port Monitor” together and click on