Samsung SDM-090P Manual do Utilizador descarregar pdf (Página 21)

Digital Multiplexer

4-3

ENGLISH

When desiring to see automatic sequential conversion screen

The automatic sequential conversion mode operates in the LIVE screen status and consists of the

following 2 cases:

The FULL screen is converted if pressing the “SEQUENCE” button in the FULL screen status. The

screen on the bottom right side is converted if pressing the “SEQUENCE” button in the 4, 9-division

screen status. The LED of the “SEQUENCE” button turns on for both cases.

The conversion time in the automatic sequential conversion mode is set in the “SEQUENCE..” of the

“2. MON OUT SET” in case of the PRPGRAM mode for the FULL screen and the time to set up is

00sec ~ 30sec. The screen set to 00sec is skipped. The screen on the right bottom is switched in the

interval of a second for the 4, 9-division screen.

➢ Method to release

- Press the “SEQUENCE” button once again. In this case the LED turns off. And then it stops on

the screen currently seen.

➢ The “SEQUENCE” button does not operate in the following cases:

- In replay mode or TRIPLEX mode

- In the division screen mode other than 4, 9-division screen

- In setting of program mode

- In displaying ALARM/LOSS LIST on screen

- During ZOOM operation

- During ALARM operation

SDM-160(gb)00255 6/30/05 11:42 AM Page 4-3

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Sem comentários

Samsung SDM-090P Manual do Utilizador Página 21