
26 27
ENG
OPERATION
2726
Test tone
Use the test tone check the speaker connection status or level.
►
To automatically output test tone
Press SETUP/MENU button, and then press ENTER
button.
•
“SETUP MODE” appears on the display and the unit goes into Setup Mode.
Press ◄ ► button to select the “TEST-T AUTO”, and then
press
ENTER
button.
•
Test signal will be automatically output as follows; F.L CEN F.R
S.R SBR SBL S.L S.W .
•
During test signal output, press ▲▼ button to adjust the individual speaker
output level from -10 to +10 dB by 1 step.
1
2
To stop test tone
•
Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Press TEST TONE button.
•
Test signal will be automatically output as follows; F.L CEN F.R S.R
SBR SBL S.L S.W.
•
During test tone output, press ▲▼ button to adjust the speaker output level from
-10 to +10 dB by 1 step.
Using the Test Tone button
►
To Manually Output Test Tone
•
F.L (front left) : -10 ~ +10dB
•
CEN (centre) : -10 ~ +10dB
•
F.R (front right) : -10 ~ +10dB
•
S.R (surround right) : -10 ~ +10dB
•
SBR (surround back right) : -10 ~ +10dB
•
SBL (surround back left) : -10 ~ +10dB
•
S.L (surround left) : -10 ~ +10dB
•
S.W (subwoofer) : -10 ~ +10dB
Test Tone Output
Press
SETUP/MENU
button, and then press
ENTER
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press ◄ ► button to select the “TEST-T MANU”, and
then press ENTER button.
Press
◄ ►
button to select the speaker you want.
•
Each time you press ◄ ► button,
F.L CEN F.R S.R SBR SBL
S.L S.W will be selected in turn.
Press ▲▼ button to set the test tone as you want.
•
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
1
2
3
4
To stop test tone
•
Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
AV-R720-ENG-비유럽향.indb 26-27AV-R720-ENG-비유럽향.indb 26-27 2007-12-10 오후 5:23:472007-12-10 오후 5:23:47
Comentários a estes Manuais