Samsung ML-2250 Manual do Utilizador

SAMSUNG®ML-2250TONER CARTRIDGE REMANUFACTURING INSTRUCTIONSSAMSUNG ML-2250 TONER CARTRIDGE© 2012 UniNet Imaging Inc. All trademark names and artwork a

26. Carefully snap the cover on making sure all the tabs lock in place.27. Install the five screws in the top cover.SAMSUNG ML-2250 TONER CARTRIDGE RE

SAMSUNG ML-2250 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONSPRINTING TEST PAGESTest pages from these machines are very easy to run. Timing is the only

SAMSUNG ML-2250 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONSFirst released in July 2004, the Samsung ML-2250 printers are based on a 22-ppm, 1200 DPI

1. Place the cartridge with the handle facing up.Remove the five top cover screws.REQUIRED TOOLSToner approved vacuumA small common screwdriverA Phill

5. Remove the four screws on the right side end cap.Remove the end cap.6. Remove the PCR. 7. Also under the right side end cap, there is a series of g

9. With the PCR cleaner assembly removed, the drum can nowbe easily removed by lifting it out. Clean out any remainingtoner from the cartridge.10. Pre

11. With a small common screwdriver, press the entire platetowards the edge of the developer roller cavity, and lift up.The plate should come loose.12

15. Replace the developer roller, and flat washers. 16. If no grease is left on the gears and gear shafts, or if it iscontaminated with toner, clean i

19. Install the new drum in place. 20. Install the PCR cleaner assembly.21. Clean the conductive grease off the left side (non gear)end cap and replac

23. Install the right side end cap and four screws. Make surethe PCR fits correctly in its holder, and all the gearsare aligned.24. Fill the hopper wi