Samsung SSA-S2000 Manual do Utilizador descarregar pdf (Página 17)

English _ 17

INITIALIZATION

FORCED INITIALIZATION WITH EXTERNAL LINE

Turn off the product, shortcircuit between the green line and

the orange line with white stripes, and turn it back on.

When the initialization is completed, 3 LED indicators are

blinking with a beep.

Restore the connection of the two lines back to their original

state.

HARDWARE FORCIBLE INITIALIZATION

This is to initialize the product forcibly by disassembling it.

Use this method only if you have lost the Master Card or the password, or if the forcible initialization with the external line

failed.

Turn off the product and detach it from the installation site, then loosen the screw (x4) on each corner to

disassemble it as shown.

Apply power to the product and short-circuit the jumper for

one second as shown.

When the initialization is completed, 3 LED indicators are

blinking.

Turn off the product and restore it to the original installation state.

X Y Z

[ \ ]

^ _ `

lzj lu{

i

zzhTzYWWW

12V

GND

Green

Orange with white stripes

Connect

(Short-

circuit)

Connect

(Short-circuit)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

Sem comentários

Samsung SSA-S2000 Manual do Utilizador Página 17