Samsung ML-1640 Series Manual do Utilizador descarregar pdf (Página 5)

SAMSUNG ML-2010 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 5

USA Sales: T 800.221.3516 F 888.791.9188

International Sales: T +1 631.590.1040 F +1 631.218.3285

www.summitechnologies.com

16) Remove the Developer Roller by lifting it out. See

Figure 15

17) Remove the 2 screws on the doctor blade. On the

fill plug side of the blade, there is the other tail of the

spring. Lift it up while removing the doctor blade so it is

not damaged. See Figures 16 & 17

It is highly recommended that the Doctor Blade be

cleaned. Failure to do so will cause streaking. Dampen

a cotton swab with alcohol, and clean the blade. Be

careful not to press too hard and damage the blade. If

the blade has a heavy buildup of toner on it, clean it

with Acetone, and then alcohol.

18) Clean the feed roller and any remaining toner from

the hopper. See Figure 18

19) Re-install the doctor blade and two screws. Make

sure the tail of the spring fits into the proper slot. See

Figures 19 & 20

Figure 14

Figure 15

Figure 16

Figure 17

Figure 18

Figure 19

1 2 3 4 5 6 7 8 9

Sem comentários

Samsung ML-1640 Series Manual do Utilizador Página 5