Samsung SPD-400 Manual do Utilizador descarregar pdf (Página 41)

English _41

● SETUP SCREEN

Alarm input

You can set the alarm input type, duration and action type of the Network Video Decoder’s

alarm input port.

1. From the Setup menu, select the

<Event ( )> tab.

2. Click <Alarm input>.

3. Select the input device type.



Type

- Normal open : It is normally open,

but if it is closed, an alarm will be

triggered.

- Normal close : It is normally closed,

but if it is open, an alarm will be

triggered.

4. Specify the <Activation time>.



Always : Always check if an alarm occurs. It activates in operated mode when the

alarm occurs.



Only scheduled time : Check if an alarm occurs at a specified day of the week for

a specified time period. It activates in operated mode when the alarm occurs.

5. Set the alarm’s output dwell time when an alarm occurs.



Alarm output : Specify the alarm output time in the alarm input setup.



If the alarm out duration is set to <Always>, the alarm continues to function until the alarm

acknowledge button is pressed, as expressed in Audio & Video page.



Test : Conducts a test alarm for the connected alarm out device.

6. When done, click [Apply ( )].

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Sem comentários

Samsung SPD-400 Manual do Utilizador Página 41