Samsung SP-350 Especificações Página 1

Downloaded From projector-manual.com Samsung Manuals

Power Cable Remote Control/ 1 Batteries (CR2025) (Not available in all locations) Cleaning Cloth D-Sub Cable LED Indication

projector is turned off automatically. Action 4 This indicates that the projector has changed to Cooling mode, because the internal temperature

3. HDMI/DVI IN Input port 4. PC 1/DVI AUDIO IN Input port 5. RS-232C port (For service only) 6. [AV IN] R-AUDIO-L Input port 9. PC

Used to flip or reverse the projected image. 7. BLANK This is used to turn off the video and audio temporarily. It is released when any button othe

Lamp Power Consumption 220W (Normal : 200W, Eco : 152W ) Life Time 2,000 Hours (Eco : 2,500 Hours ) Input TerminalD-Sub 15p x 2 Analog RGB, analog YP

VESA 1280 x 720 70Hz 52.500 70.000 89.040 VESA 1280 x 720 72Hz 54.072 72.000 91.706 VESA 1280 x 720 75Hz 56.456 74.777 95.750 V

Downloaded From projector-manual.com Samsung Manuals

| Basic Settings| Connecting the Power| Connecting an External Device | Installing the Projector Install the projector so that the beam from

You can adjust the size of image within zoom range by manipulating the Zoom Knob. Focus the picture on the screen using the Focus Ring. If you

260 5283.2 3962.4 9106 7587 660 270 5486.4 4114.8 9457 7880 686 280 5689.6 4267.2 9809 8173 711 290 5892.8 4419.6 10160 8466 737 300 6096.0 4572

To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instr

6.9 5.5 4.1 9.2 30.17.1 5.7 4.3 9.6 31.47.4 5.9 4.4 9.9 32.47.6 6.1 4.6 10.2 33.4 2. Select one from Front-Floor, Front-Ceiling, Rear-Floor and Rear-

→ Keep adjusting until the vertical line on the Test Pattern becomes parallel with the outer vertical line on the screen. 8. Press the ▲ or ▼

<Display Properties> tab will appear.2. Click on [Settings] tab and set the <Screen resolution> by referring to <Resolution> desc

| Basic Settings| Connecting the Power| Connecting an External Device | 1. Rear of Projector Plug the power cord into the power terminal o

Check that your PC and projector are turned off. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using

Connect the [PC IN 1] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of t

First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-S

First, check that the AV device and your projector are turned off. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cab

Downloaded From projector-manual.com Samsung Manuals

| Basic Functions| Input| Picture| Setup| Option| Turning on the projector Check that the lens cover is opened completely. Turn the power o

out from the mains socket, therefore the mains plug shall be readily operable. z There is a danger of electric shock or fire. Always unplug the un

* Click the Play( )/Stop( ) button in the table below to view the video file. Screen Adjustment Description Play/Stop Source List You can select a

- User This mode is a customized mode created using the Mode > Save function.▶ Presentation and Text modes are only enabled if the input sig

- For the RGB signal of [HDMI] mode 2) 7.5 IRE : Sets the black level to 7.5 IRE1) Normal: Used in a normal environment.2) Low: Used when the dark pa

1) Front-Floor : Normal Image 2) Front-Ceiling : Horizontal/Vertical Reversed Image 3) Rear-Floor : Horizontally Reversed Image 4) Rear-Ceiling :

DVD, etc…) to the HDMI terminal Auto Auto settings - - Reset Using this function, you can reset various settings to the factory default setting

1) Balance 4) 1kHz 2) 100Hz 5) 3kHz 3) 300Hz 6) 10kHzFilter Check TimeSets the check period for the filter. (Unit: hour) 1) Off 2) 100 3) 200

Check that your PC and projector are turned off. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using

Connect the [PC IN 1] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of t

| Care and Maintenance| Contact SAMSUNG WORLDWIDE| Authority| To clean the exterior and lens of the projector Clean the projector using a

The projector has been designed so that the projector does not work if the lamp cover is not completely assembled after a lamp replacement. If the

Do not install on an unstable location, or on a stand smaller than the product. z If the product falls it may harm children. Install on a flat and s

When washing the filter under running water, make sure to dry it completely. The moisture may cause the filter to corrode.If dust cannot be separated

REP. DOMINICA 1-800-751-2676 http://www.samsung.com/latinTRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com/latinVENEZUELA 0-800-

TADJIKISTAN 8-10-800-500-55-500 UKRAINE 8-800-502-0000 http://www.samsung.com/ua http://www.samsung.com/ua_ru UZBEKISTAN 8-10-800-500-55-500 http://w

Downloaded From projector-manual.com Samsung Manuals

disconnect the power cord from a wall outlet and contact a Service Center. Do not disassemble, or attempt to fix or modify the product. z When the

product using a soft dry cloth. z Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent

Correct disposal of batteries in this product - Europe only (Applicable in the European Union and other European countries with separate battery retur

| Product Features | Product Views | Remote Control | Product Specifications | An optical engine adopting new LCD technology - 1024 x 7

1. Indicators - STAND BY (Blue LED) - LAMP (Blue LED) - TEMP (Red LED) ※Refer to the LED Indications. 2. VOL - / + & Select and Move B