Samsung NETWORK DIGITAL VIDEO RECORDER Manual do Utilizador

i USER MANUAL 4 CHANNELS NETWORK DIGITAL VIDEO RECORDER

5 Exit from the SYSTEM SETUP menu 3. CAMERA SETUP CAMERA SETUP > CAMERA SELECT CH1 CAMERA RECORD ON MOTION DETECTION ON MOTION

6detection is triggered. Note: PAL: (1~4P/6P/8P/12P/25P) NTSC=15P, PAL=12P on default. f ALARM RECORD DWELL 5SEC (1-30) Use ◄ or ► button to se

7and down for indicating current event which been selected. Press “◄ or ►” key to select events storage from master hard drive or slave hard drive .

8h SLAVE HDD CAPACITY N/A The slave HDD capacity sign will be indicated in left on the screen, It can’t be revised. HDD N/A is with no HDD.

9CHAPTER 4 OPERATION PROCEDURES 1 Getting Started with your machine Please assure the following instructions before you switch on the machine: 1.1

10z “REW” or “FF*2/4/6” sign will be indicated in top left corner on the screen. Press Pause button to pause (field by field) for forward. This func

115 Backup The DVR support 2 methods for backing up: 1. VCR Backup The DVR Provides composite signal output for back-up use. You can keep the Imag

12playback mode. The screen will start showing BACKUP TO CF CARD AVI FILE on top of the screen for around 1 second and then appear AVI message in the

13triggered during schedule “A” period. Terminal connector： Pin 1-4 ----- ALARM1-ALARM4，Camera alarm input. GND ----- GND N.C ----- Relay N.C，A

14CHAPTER 5 RECORDING TIME LENGTH Recording time length is related to recording speed and recording quality. Tables below are offered for your refere

ii INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and complet

15CHAPTER 6 HARD DRIVE INSTALLATION PROCEDURES 1. Hard drive jumpers need to be set properly in order to make DVR function correctly. 2. Instructio

16 5. Hooking up IDE cable and power cable to the hard drive as picture below, please take a note on that the red line on IDE cable must be next to

iiiWarnings and Cautions WARINGS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MISTURE. DO NOT INSERT ANY METAL

ivTABLE OF CONTENTS CHAPTER 1 INTRODUCTION ------------------------------------------------------------------------------------------ 1 FEATURE ---

vSETUP MENU List SYSTEM SETUP BUZZER DURATION 3 SEC VIDEO LOSS ALARM ON HDD PASSWORD SET TIME/DATE EXITCAMERA SETUP CAME

1CHAPTER 1 INTRODUCTION This product is 4 cameras input appliance with multiple function which will bring you following features: z Device can be

2CHAPTER 2 Hardware Overview Front Panel Layout Overview 123456 7 8 91011 12 13 14 15 16 171918 20222321 Buttons Function List Part Label Function

314 F.Fwd Search Press F. Fwd to play video forward at high speed. Press the button again the speed will be change circulative from ×2,×4, , to

4CHAPTER 3 SETUP PROCEDURES 1. MAIN MENU SETUP SETUP MENU > SYSTEM SETUP CAMERA SETUP RECORD SETUP SCHEDULE RECORD EVENT LIST HDD MANAGEMENT LO