My Camera > Shooting modes
65
Using the Bulb function
Use the Bulb function to shoot night scenes or the night sky. While you are
pressing [Shutter], the shutter is left open so you can create moving light
eects.
To use a Bulb,
Completely rotate the command dial clockwise to Bulb
→
press and hold [Shutter] for the desired time.
•
If you set a high ISO value or open the shutter for a long time, image noise
may increase.
•
Drive options, ash, and One touch shot cannot be used with the Bulb
function.
•
The Bulb function is available only in Manual mode.
•
Use a tripod and shutter release to prevent your camera from shaking.
•
The longer you open the shutter, the longer it takes to save a photo. Do not
turn the camera o while the camera saves a photo.
•
If you use this function for a long time, use a fully charged battery.
Custom mode
Custom mode lets you create your own shooting modes by adjusting
options and saving them.
Saving a custom mode
1
On the Mode screen, touch Expert
→
Program, Aperture
Priority, Shutter Priority, or Manual.
2
Set shooting options.
•
For a list of options, refer to "Shooting Functions". (p. 73)
3
Touch
→
5
→
Save as Custom Mode.
•
You can also touch
→
.
4
Touch a location to save (C1, C2, or C3).
•
You can overwrite the settings if an old mode is saved to the same
location.
5
Touch .
Comentários a estes Manuais