Samsung SND-6011R Guia de Configuração descarregar pdf (Página 21)

English _21

● NETWORK CONFIGURATION

How to configure with a dynamic IP

Notice for Setup with a Dynamic IP

A dynamic IP allows you to use IP address resources effectively. It is needed when assigning an IP address

using a DHCP server in a LAN environment, when assigning an IP address using a DHCP of a router in a

local network, or when connecting a network camera to a modem that supports DHCP.



If the network camera is set to use a dynamic IP, the monitoring PC program in the local network environment or

in an external remote location may not detect the network camera. This is because IP and port may be changed

when the router power is reset or recovered from a failure.

To solve such problems, it is recommended to set up the port forwarding in the higher router layer.

Refer to “How to configure port forwarding” to learn more about how to configure port forwarding. (Page 22)

How to check and configure a dynamic IP address

1. Launch the IP Installer on the PC for IP configuration.

2. Click the [Search] button.

A list of network devices, whose IP addresses were

assigned by the DHCP of the IP router located at the same

router, is displayed.

3. Check the MAC address information and select a device to

configure.

4. Click the [Manual Set] button. You can check assigned IP

from DHCP in the generated window.

5. Click the [OK] button. Configuration is now complete.



The password for camera access is identical to the “admin”

Default value is “4321”.



HTTP Port is used to connect to the camera using web browser.

Default value is “80”.



VNP Port is to control video transmission.

Default value is “4520”.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Sem comentários

Samsung SND-6011R Guia de Configuração Página 21